Metal Shingle Roofing in St. Louis

St. Louis roofs take a beating that most homeowners elsewhere never see. Between the humid summers, the spring hail that rolls up the Missouri River valley, and the freeze-thaw cycles that crack mortar and lift fasteners, a roof here has to do more than shed water. It has to absorb impact. Metal Shingle Roofing in St. Louis answers that demand with the look of architectural shingles over the strength of steel, which is why we install it on brick bungalows in South City, Tudors in Webster Groves, and two-story homes out in Chesterfield. The Mansard slate roofs of Lafayette Square and Soulard proved a century ago that this city respects a traditional profile. Metal shingles give you that same profile with a lifespan measured in decades, not the 15 to 20 years you get from asphalt. If you are weighing materials, our metal roof installation page lays out the full range. We have been hanging metal on St. Louis County homes since 2009, and we are a Metal Roofing Alliance Member.

Why Metal Shingle Roofing Matters on St. Louis Brick and Bluff

St. Louis sits where the Missouri meets the Mississippi, on rolling bluffs and river bottoms, and that geography drives the weather that hits your roof. Hail doesn't politely miss the city. The 2011 Good Friday tornado tore through Bridgeton and Maryland Heights, and the May 2025 tornado cut through north city. Between those events, you get the ordinary spring hailstorms that pit asphalt shingles across Kirkwood and Creve Coeur. Metal shingles carry an impact rating that asphalt simply cannot match.

Here is what actually matters on a St. Louis roof:

• Hail resistance keeps the granular surface intact when spring storms drop golf-ball hail on a Florissant ranch.
• Freeze-thaw durability holds up through the ice storms that sheet the Mississippi River bluffs in January and February.
• Traditional profile matches the slate and shake look that historic districts and HOAs expect in Clayton and Ladue.
• Lifespan runs two to three times longer than the asphalt shingles common on post-war brick ranches in South County.
• Low maintenance means no granule loss, no curling tabs, and no repeated replacement cycles on a 1920s bungalow.

For a brick home that has already survived a century of Missouri weather, a metal shingle roof is the material that keeps up with the walls.

Key info: A homeowner in Webster Groves called us after a 2024 hailstorm stripped the granules off her 18-year-old asphalt roof. We installed stone-look metal shingles that matched the original architectural style and carried a Class 4 impact rating, which many insurers recognize with a premium discount. Some carriers do, some don't, so confirm with your agent before you buy.

St. Louis County and the City of St. Louis both require roofing permits for a full replacement, and the thresholds and inspection steps vary by jurisdiction. Check with the St. Louis City Building Division or your county building department before any crew touches your roof.

How We Install Metal Shingles on a St. Louis Home

Metal shingles are not a peel-and-stick product. Each panel interlocks, each course has to run true, and the underlayment has to handle the summer humidity that builds under a dark roof in July. We tear off to the deck, inspect the sheathing, and rebuild from the substrate up. On the older brick homes in University City and the Central West End, that often means replacing rotten fascia board before a single shingle goes down.

Our process runs in a fixed order:

1. We inspect the deck, rafters, and flashing and photograph anything that needs repair.
2. We pull the permit with the local building department and post it on site.
3. We tear off the old roof and haul it away the same day.
4. We install ice-and-water shield at the eaves and in the valleys, then a synthetic underlayment across the field.
5. We set new drip edge and step flashing at walls, chimneys, and skylights.
6. We lay the metal shingle courses from the eave up, locking each panel and fastening per the manufacturer's spec.
7. We install ridge caps, venting, and snow guards where the roof pitch calls for them.
8. We walk the roof and the ground with you, then hand over the warranty paperwork.

Every job gets a final walkthrough, and we do not leave until you have seen the flashing details yourself.

Key info: On a 1920s Tudor in Kirkwood, the original roof had three layers of shingles stacked on skip sheathing. We stripped it to the deck, replaced 14 feet of rotted fascia, and installed slate-profile metal shingles that satisfied the neighborhood's design review. The homeowner got the historic look without the weight or the maintenance of real slate.

We handle the flashing, chimney, and skylight work as part of the install, and you can read more about that on our flashing and chimney repair page. For homes in areas with historic review, we also coordinate the paperwork so the profile and color clear the board the first time.

Metal Shingle Options We Install in St. Louis

Not every metal shingle is the same product, and the right choice depends on your roof pitch, your neighborhood, and how much you want to spend. Here is how the main approaches compare for a St. Louis home.

We match the profile to the house, not the other way around, and we tell you when a retrofit is not allowed by code.

Metal Shingle Roofing Cost in St. Louis: What to Expect

Most St. Louis homeowners should plan on a starting point of From $9/sq ft installed, and that figure moves with the profile, the panel gauge, and the complexity of the roof. A simple gable on a Florissant ranch sits near the low end. A turreted Central West End mansion with multiple valleys, dormers, and copper accents sits well above it. The number is a starting point, not a quote.

The factors that move the price most:

• Roof complexity drives labor, and valleys, dormers, and turrets add cut time and waste.
• Pitch and access matter, because a steep roof or a tight lot in Soulard needs staging and fall protection.
• Deck condition counts, since rotted sheathing on an older brick home has to be replaced before the metal goes down.
• Panel profile and material range from stamped steel up to copper, and the spread is wide.
• Permits and historic review can add time and fees in protected districts.

Get two or three written estimates and compare line by line, not just the bottom number. A low bid that skips underlayment or flashing is not a bargain. Our full pricing overview breaks down what each tier includes.

Finding Metal Shingle Roofing Near Me in St. Louis: What to Check Before You Hire

Hiring a roofer near St. Louis is a decision you live with for 40 years, so slow down and check the basics. Ask for the Missouri contractor license number and a certificate of insurance that lists general liability and workers' compensation. Call two references from jobs completed in the last year, and drive past one of them if you can. Confirm who pulls the permit, because the homeowner is the one who eats the fine if the crew skips it. And if your home sits in a historic district or under an HOA, get the design approval in writing before you sign a contract.

We are a Metal Roofing Alliance Member, in business since 2009, and we hand over the insurance certificate before you ask. Reach out through our contact page for a free estimate at (314) 689-1531. We answer within 24 hours and we do not pressure you to sign on the spot.

Metal Shingle Roofing in St. Louis: Pricing Guide

Indicative pricing, the exact cost depends on square footage, finish, and site access. Free personalized estimate within 24h at (314) 689-1531.