Serving the St. Louis area  ·  (314) 689-1531  ·  Open Mon-Sun 7am-7pm
📞 (314) 689-1531 Free Quote

Metal Roofing in Arnold, MO (63010) · Local Professionals

St. Louis Metal Roofing · Fast response in Arnold and the St. Louis area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Arnold sits on the river bluffs south of St. Louis, where the wind comes across the valley and hits every roof on the ridge. The housing stock here runs from brick ranches and split-levels built in the 1960s and 70s to newer two-story homes off Richardson Road and Jeffco Boulevard, with a mix of older farmhouses on larger lots near the Meramec River bottom.

Homeowners in Arnold (63010) call St. Louis Metal Roofing because we understand how storm season tests fasteners, ridge caps, and flashing on these bluffs. We have been serving the area since 2009, and we are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation. Whether you are near Arnold City Park or off Highway 141, we know the local conditions that affect your roof.

Metal Roofing in Arnold (63010)

Arnold's terrain is defined by its river bluffs and rolling hills, which means many homes sit on graded lots with retaining walls and drainage swales. The wind that sweeps across the Meramec and Mississippi valleys can lift panels and work screws loose over time. Older neighborhoods like those off Church Road and Tenbrook Road have mature oaks and sycamores that drop limbs and fill gutters, leading to ice damming at the eaves in winter. Newer developments, such as those near Pomme Creek, often have tighter lot lines and HOA design guidelines that influence panel profile and color choices. Our team has worked on everything from brick ranches to new construction, and we know how to handle the access challenges that come with steep driveways and limited space.

Since 2009, we have been installing, repairing, and replacing metal roofs across Arnold and the surrounding St. Louis area. We are familiar with local building department requirements and can help you navigate the permit process.

Our services in Arnold

How a Job Works in Arnold

Step 1: Call us at (314) 689-1531 or request a free estimate online. We will schedule an on-site assessment at your convenience, inspect your current roof, discuss your options, and provide a written estimate. We will also check for any storm damage that might be covered by insurance and document it for your claim.

Step 2: Once you approve the estimate, we will pull the necessary permits from the City of Arnold and schedule the work. Our insured crews will arrive on time, protect your landscaping, and complete the installation efficiently. For homes with steep grades or tight access, we plan ahead to stage materials safely. If your neighborhood has HOA design rules, we will coordinate with you to ensure the chosen panels meet the guidelines.

Step 3: After the work is done, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you are satisfied. We do not consider the job finished until you are happy with the result.

Pricing for metal roofing in Arnold depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are considering a retrofit over existing shingles, that starts at $7 per square foot. Repairs, such as fixing a leak or replacing screws, start at $450. We also offer coatings, gutters, and snow guards. For a precise estimate tailored to your home, call us at (314) 689-1531. We provide free estimates and honest advice.

✅ Metal Roofing Alliance Member, licensed and insured for work in Arnold and nearby areas.

My house is on a steep lot near the Meramec River bluffs. Can you install a metal roof safely?
Yes. We have experience with steep grades and limited access. Our crews use proper fall protection and staging equipment to work safely on sloped properties. We will assess your site during the free estimate and plan the installation accordingly.
A storm just knocked limbs onto my roof and I see a leak. How fast can you respond in Arnold?
We offer free inspections for storm and wind damage and can often schedule a visit within a day or two, depending on demand after a major storm. Call us at (314) 689-1531 to report the damage and set up an inspection. We will document everything for your insurance claim.
What does a typical metal roof replacement cost in Arnold?
Most replacements fall between $9 and $12 per square foot, depending on the material and complexity. A basic corrugated panel roof might start around $5.50 per square foot, while standing seam or stone-coated steel runs higher. We provide a detailed written estimate after inspecting your roof.
Do I need a permit to replace my roof in Arnold, and how do I get one?
Yes, roofing permits are typically required for replacements and re-roofs in Arnold. The rules and fees are set by the city, and we recommend checking with the City of Arnold website or calling the building department to confirm current requirements. We can handle the permit application for you as part of our service.
My HOA has rules about roof colors. Can you help me choose a metal roof that will be approved?
Absolutely. We are familiar with many local HOA guidelines and can provide samples and documentation to submit for approval. We will work with you to select a panel profile and color that meets the neighborhood standards while giving you the durability of metal.
Are you insured for work on my property?
Yes, we are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance upon request so you can have peace of mind.
What maintenance does a metal roof need in Arnold's climate?
In our area, we recommend an annual inspection, especially after storm season. Check for loose screws, debris in gutters, and any signs of ice damming at the eaves. We offer maintenance plans and can replace worn screws or apply a protective coating to extend the life of your roof.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in St. Louis

All your work handled by qualified professionals in St. Louis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in St. Louis

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in St. Louis · Response within 24h · No commitment · ☎ (314) 689-1531

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in St. Louis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm