Serving the St. Louis area  ·  (314) 689-1531  ·  Open Mon-Sun 7am-7pm
📞 (314) 689-1531 Free Quote

Metal Roofing in Clayton, MO (63105) · Local Professionals

St. Louis Metal Roofing · Fast response in Clayton and the St. Louis area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Clayton's brick homes and tree-lined streets sit just west of Forest Park, and the housing stock tells the story: 1920s Tudors and colonials near Shaw Park, mid-century ranches off Clayton Road, and newer infill close to the downtown business district. Many of these roofs are original or one layer away from it, and the freeze-thaw cycles here find every weak flashing and loose fastener.

Homeowners in 63105 call St. Louis Metal Roofing because we understand how Clayton roofs fail. The parapets and chimneys on older brick homes leak first, and the steep pitches on some of the two-story homes near the Clayton School District campus make access tricky. We have been working on St. Louis area roofs since 2009, and we bring fully insured crews and a Metal Roofing Alliance membership to every job.

Metal Roofing in Clayton (63105)

Clayton sits on rolling ground with mature oaks and sycamores, and the lots range from tight 50-foot frontages near the business district to larger parcels near Shaw Park. That variety matters for roofing. Tight lots mean we stage materials carefully and often use conveyor lifts instead of a dump truck in the driveway. Older brick homes often have multiple roof levels, dormers, and original slate or clay tile that needs careful removal. The freeze-thaw cycles in Clayton are hard on flashing, especially at parapet walls and chimneys, and we see a lot of ice damming at the eaves on the north-facing slopes of older homes. We also work around the historic character of neighborhoods near the Clayton government buildings, where homeowners want a metal roof that looks appropriate for the architecture.

Our team has been serving Clayton and the surrounding St. Louis area since 2009, and we know the local building department's inspection rhythm.

Our services in Clayton

How a Job Works in Clayton

Step 1: You call us at (314) 689-1531 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and we walk the roof with you if you want. We check the flashing at parapets and chimneys, look for loose fasteners, and measure the roof. You get a written estimate with options, no pressure.

Step 2: Once you approve, we pull the required permits from the City of Clayton. For a full replacement, that means a building permit and inspections, and we handle the paperwork. If your home is in a historic district or under an HOA, we help you submit the design details for approval. On tight lots near the downtown business district, we plan material delivery and dumpster placement to keep the street clear. Our crews are fully insured and we protect your landscaping and windows during tear-off.

Step 3: When the work is done, we do a magnet sweep for nails, clean the gutters, and walk the property with you. We do not leave until you are satisfied and the site is clean.

Pricing in Clayton depends on the size and complexity of your roof, the material you choose, and the condition of the existing roof. For a basic corrugated or ribbed panel roof, you are looking at around $5.50 per square foot. Standing seam starts around $10 per square foot, and a full metal roof replacement typically runs from $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs, like a leak at a chimney or a flashing fix, start at $450, and screw replacement or re-fastening starts at $750. We also handle gutters for metal roofs from $9 per linear foot. Every roof is different, so call (314) 689-1531 for a free estimate and we will give you a clear, written price.

✅ Metal Roofing Alliance Member, licensed and insured for work in Clayton and nearby areas.

My 1920s brick home near Shaw Park has a slate roof that is failing at the chimney. Can you match the look with metal?
Yes. Many Clayton homeowners in older neighborhoods choose a standing seam or metal shingle profile that resembles slate. We can also install a stone-coated steel roof that looks like shake or tile. We inspect the chimney flashing carefully because that is where most leaks start on these homes.
A storm just blew through Clayton and I have a lifted panel on my metal roof. How fast can you get out?
Call us at (314) 689-1531. We offer free storm damage inspections and can usually get a crew out within 24 to 48 hours for emergency repairs. We tarp or secure the roof first, then give you a repair estimate and help with insurance documentation if needed.
What does a typical metal roof replacement cost for a 2,000-square-foot home in Clayton?
For a home that size, a standing seam roof might run between $20,000 and $30,000, depending on pitch, access, and whether we need to remove multiple layers. A corrugated panel roof could be closer to $11,000 to $15,000. We provide a free estimate so you know exactly what your roof needs.
Do I need a permit from the City of Clayton for a metal roof replacement?
Yes, a full replacement typically requires a building permit. The City of Clayton website has the contact information for the building department, and we can help you understand the process. Rules vary, so always check with the city before starting work. We pull permits as part of our service.
My neighbor and I share a property line, and my new metal roof will overhang slightly. Do I need their permission?
It is always best to talk with your neighbor before installation. Local property line rules and HOA covenants may restrict overhangs or require a setback. We can review your plat or survey and coordinate with your neighbor and HOA to avoid issues.
Are you fully insured for work on my Clayton property?
Yes. We carry general liability insurance and workers' compensation coverage for all our crews. We can provide a certificate of insurance before we start.
What maintenance does a metal roof need in Clayton's freeze-thaw climate?
Check the flashing at chimneys and parapets every fall, and clear debris from gutters. After winter, look for loose fasteners or lifted panels. We offer free inspections and can tighten or replace screws to prevent leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in St. Louis

All your work handled by qualified professionals in St. Louis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in St. Louis

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in St. Louis · Response within 24h · No commitment · ☎ (314) 689-1531

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in St. Louis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm