Serving the St. Louis area  ·  (314) 689-1531  ·  Open Mon-Sun 7am-7pm
📞 (314) 689-1531 Free Quote

Metal Roofing in Creve Coeur, MO (63141) · Local Professionals

St. Louis Metal Roofing · Fast response in Creve Coeur and the St. Louis area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Creve Coeur sits right where Ladue Road meets I-270, and its mix of 1960s brick ranches, newer two-story homes off Mason Road, and wooded lots near Creve Coeur Lake gives homeowners a specific set of roofing challenges. Hail here hits hard, and shingle roofs show it fast.

That is why more Creve Coeur homeowners in 63141 are calling St. Louis Metal Roofing. We have been installing and repairing metal roofs since 2009, and we know how local hail seasons pock asphalt shingles while Class 4 metal stands up to the abuse. From the older neighborhoods near Olive Boulevard to the newer subdivisions off Conway Road, we help property managers and homeowners stop patching and start protecting.

Metal Roofing in Creve Coeur (63141)

Creve Coeur properties range from tight-lot 1950s ranches near Lindbergh Boulevard to sprawling newer builds with steep pitches and complex rooflines out toward Spoede Road. The terrain rolls, and mature oak and pin oak canopies drop limbs and debris that trap moisture and stress fasteners. Drainage matters here: heavy spring storms send water off roofs fast, and without proper gutters and flashing, it finds foundation walls and lower grades. We size gutters for metal roof runoff and check valley and chimney flashing closely, because those are the spots that fail first after a hail or wind event.

Our team has served Creve Coeur and the greater St. Louis area since 2009, and we are a Metal Roofing Alliance member. We handle Stone-Coated Steel Roofing and Standing Seam Metal Roofing with fully insured crews, and we understand how local code and HOA rules affect panel profiles and colors.

Our services in Creve Coeur

How a Job Works in Creve Coeur

Step 1: You call (314) 689-1531 or request a free estimate online. We schedule an on-site assessment, inspect your existing roof, check attic ventilation and flashing details, and talk through metal options that fit your home and budget. You get a written scope and price before any work begins.

Step 2: We handle the work itself, including permit coordination with the local building department and, when needed, HOA design review. On tighter Creve Coeur lots, we plan material staging and dumpster placement so driveways and neighbor access stay clear. Crews protect landscaping and work around mature trees, and we keep you updated on schedule and weather delays.

Step 3: Cleanup and final walkthrough. We magnet-sweep for nails, haul away old materials, and walk the finished roof with you. We leave your property clean and show you exactly what was done.

Pricing in Creve Coeur depends on roof size, pitch, access, and the condition of the existing deck and flashing. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal over shingles (retrofit) at $7. Corrugated and ribbed panel roofing starts at $5.50, stone-coated steel and metal shingle roofing at $9, and copper or specialty metal at $20. Repairs and leak repairs start at $450, screw replacement and re-fastening at $750, flashing and chimney or skylight repair at $600, and coating or painting at $2.50. Snow guards and ice protection start at $1,200, and gutters for metal roofs start at $9 per linear foot. For a free estimate tailored to your Creve Coeur home, call (314) 689-1531.

✅ Metal Roofing Alliance Member, licensed and insured for work in Creve Coeur and nearby areas.

My 1960s ranch near Lindbergh Boulevard has hail dents all over the shingles. Is Class 4 metal worth it in Creve Coeur?
For many Creve Coeur homeowners, yes. Class 4 metal resists hail impact far better than standard asphalt shingles, and it often earns insurance premium discounts. We inspect your roof, document the damage, and explain options like stone-coated steel, which gives a shingle look with metal durability.
A storm just tore panels loose on my roof in Creve Coeur. How fast can you respond?
We prioritize active leaks and storm damage. Call (314) 689-1531 and we will schedule an inspection, often same or next day depending on storm volume. We can tarp or secure vulnerable areas and provide a written repair estimate.
What does a typical metal roof replacement cost in Creve Coeur?
Most full replacements fall between $9 and $14 per square foot installed, depending on material, roof complexity, and whether we remove existing layers. Smaller repairs start at $450. We give you a firm written price after inspecting your roof.
Do I need a permit for a metal roof in Creve Coeur, and where do I check the rules?
Roofing permits are commonly required for replacement or re-roof, and requirements vary. We recommend confirming details with the City of Creve Coeur website or the local building department before work starts. We can help coordinate the permit process as part of your project.
My HOA has design rules. Can you help with approval for a metal roof in Creve Coeur?
Yes. Many Creve Coeur subdivisions have HOA design review for panel profile and color. We provide product samples and documentation to support your application, and we schedule work around approval timelines. We also respect property-line setbacks and coordinate with neighbors on staging.
Are you fully insured for work at my Creve Coeur property?
Yes. We carry general liability insurance and workers' compensation coverage. We are happy to provide proof of insurance before work begins so you have peace of mind.
What maintenance does a metal roof need in Creve Coeur's climate?
Check fasteners and flashing annually, especially after hail or wind, and keep gutters clear of oak leaves and debris. Snow guards help prevent ice sliding at eaves. We offer inspections and tune-ups to catch small issues before they become leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in St. Louis

All your work handled by qualified professionals in St. Louis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in St. Louis

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in St. Louis · Response within 24h · No commitment · ☎ (314) 689-1531

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in St. Louis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm