Serving the St. Louis area  ·  (314) 689-1531  ·  Open Mon-Sun 7am-7pm
📞 (314) 689-1531 Free Quote

Metal Roofing in Washington, MO (63090) · Local Professionals

St. Louis Metal Roofing · Fast response in Washington and the St. Louis area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Washington, Missouri, sits where the Missouri River bends north before meeting the Mississippi, and the housing stock tells that river story clearly. Brick homes from the late 1800s and early 1900s line the streets near the riverfront and downtown, many with steep roofs, chimneys, and parapets that take a beating from wind and ice. Newer subdivisions spread out toward the bluffs and Highway 100, mixing two-story homes with farmhouses and barns on the outskirts.

Homeowners in Washington (63090) call St. Louis Metal Roofing because we understand the local failure points: parapet walls that leak first on older brick buildings, chimneys that separate from the roof plane, and panels that lift when a storm rolls through the Missouri River valley. We have been serving Washington and the surrounding St. Louis area since 2009, and we are a Metal Roofing Alliance member.

Metal Roofing in Washington (63090)

Washington's terrain is a mix of river bottom and rolling bluffs, and that shapes how roofing work gets done here. On the flats near the river, older homes sit close together with narrow side yards, so staging materials and getting a crew safely to the roof takes planning. On the bluffs, grade and access change from block to block, and wind exposure is higher. The older brick homes near downtown and along the riverfront often have parapets and chimneys that need careful flashing detail; those are the spots we see leaking first. Farmhouses and barns outside town have wide, low-slope roofs where snow guards and ice protection matter in winter. We handle standing seam, corrugated and ribbed panels, metal shingles, stone-coated steel, and copper and specialty metal roofing, and our insured crews are used to working around tight lots, historic details, and the freeze-thaw cycles that come with Missouri winters.

Our team has been serving Washington and the St. Louis area since 2009, and we are a Metal Roofing Alliance member.

Our services in Washington

How a Job Works in Washington

Step 1: You call us at (314) 689-1531, and we schedule a free on-site assessment. We look at the roof, the flashing, the chimney and parapet details, and the access around your property. You get a written estimate with options, not pressure.

Step 2: Once you approve, we pull the required permits through the local building department and coordinate any HOA or historic review if your neighborhood requires it. On tight lots near downtown Washington, we plan material drops and dumpster placement ahead of time so we are not blocking alleys or driveways. Crews are fully insured, and we protect landscaping and siding before we start.

Step 3: We clean up every day and do a final walkthrough with you. Magnets sweep the yard for screws and metal scraps, and we walk the roof together so you can see the finished work. We leave your property clean.

Pricing in Washington depends on the size and pitch of your roof, access, the condition of the decking, and how quickly the work needs to happen. As a ballpark, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and metal roof replacement starts around $9 per square foot. A retrofit over existing shingles starts around $7 per square foot, corrugated and ribbed panel roofing starts around $5.50 per square foot, and stone-coated steel or metal shingles start around $9 per square foot. Repairs and leak repairs start around $450, screw replacement and re-fastening starts around $750, and flashing, chimney, and skylight repair starts around $600. Coating and painting starts around $2.50 per square foot, and gutters for metal roofs start around $9 per linear foot. Call (314) 689-1531 for a free estimate on your Washington property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Washington and nearby areas.

My brick home near the Washington riverfront has a parapet wall that leaks. Can you fix that without replacing the whole roof?
Yes. Parapet leaks are common on older brick buildings in Washington because the flashing at the wall-to-roof joint fails before the roof panels do. We inspect the parapet cap, the counterflashing, and the roof-to-wall transition, then repair or replace the failed flashing and seal the joints. If the panels are still sound, a targeted repair usually solves it.
A storm just peeled back panels on my roof in Washington. How fast can you get out?
We offer free inspections for storm and wind damage and prioritize active leaks and lifted panels. Call (314) 689-1531, and we will schedule the earliest available visit. If the roof is open to the weather, we can often tarp or secure the area temporarily while we prepare a repair estimate.
What does a typical metal roof replacement cost for a home in Washington (63090)?
Most full replacements in Washington fall in a range based on square footage, roof pitch, and the number of penetrations like chimneys and skylights. Our published starting rates are around $9 per square foot for replacement and around $10 per square foot for standing seam. A free on-site estimate at (314) 689-1531 gives you a real number for your roof.
Do I need a permit to replace my roof in Washington, Missouri?
Roofing permits are commonly required for a full replacement or re-roof, but thresholds and inspection requirements vary by jurisdiction. We verify the rules with the local building department before work starts. You can also check the City of Washington website at https://washmo.gov for general information, and we will confirm the specifics for your address.
My neighborhood has an HOA. Can you help with approval for a metal roof?
Yes. We provide panel profiles, color samples, and specification sheets you can submit to your HOA or historic review board. If your Washington neighborhood has design restrictions, we can suggest profiles that meet them, such as standing seam or metal shingles in approved colors. We coordinate the paperwork so the approval process does not hold up your project.
Are you insured for work on my Washington property?
Yes. We are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before work begins so you have it on file.
What maintenance does a metal roof need in Washington's climate?
In Washington, the main maintenance items are checking fasteners after high-wind storms, clearing debris from valleys and gutters, and inspecting flashing at chimneys and parapets before winter. Ice damming can happen at the eaves on bluff-top homes, so snow guards and proper attic insulation help. We recommend a professional inspection every couple of years, and we offer free estimates for any needed repairs.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in St. Louis

All your work handled by qualified professionals in St. Louis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in St. Louis

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in St. Louis · Response within 24h · No commitment · ☎ (314) 689-1531

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in St. Louis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm