Serving the St. Louis area  ·  (314) 689-1531  ·  Open Mon-Sun 7am-7pm
📞 (314) 689-1531 Free Quote

Metal Roofing in Maryland Heights, MO (63043) · Local Professionals

St. Louis Metal Roofing · Fast response in Maryland Heights and the St. Louis area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (314) 689-1531
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Maryland Heights sits just west of the Missouri River, where post-war brick ranches and 1990s two-story subdivisions share the same hail belt. If your shingle roof is pocked from last spring's storms, you are not alone in 63043.

Homeowners around Creve Coeur Park and along Dorsett Road call St. Louis Metal Roofing because we have been installing and repairing metal roofs here since 2009. We know how Maryland Heights hail seasons chew up asphalt and why so many owners are moving to Class 4 metal.

Metal Roofing in Maryland Heights (63043)

Maryland Heights is a mix of older brick ranches near Fee Fee Road and newer two-story homes off McKelvey Road, with lot sizes that range from tight cul-de-sac pads to half-acre yards backing to trees. The ground here is heavy clay in places, so downspout discharge and gutter sizing matter as much as the panels. Steep driveways and mature pin oaks mean we plan staging and fall protection before the first panel comes off the truck. Hail is the dominant failure mode: it fractures shingle granules, dents soft metals, and opens seams. That is why standing seam and stone-coated steel are the two systems we install most in this ZIP code.

Our team has served Maryland Heights and the surrounding St. Louis area since 2009, and we are a Metal Roofing Alliance member. We are fully insured with general liability and workers' compensation.

Our services in Maryland Heights

How a Job Works in Maryland Heights

Step 1: You call (314) 689-1531 or request a free estimate. We schedule an on-site assessment, inspect the roof, flashing, and attic side of the deck, and give you a written scope with material options and ballpark pricing.

Step 2: We pull the required roofing permit through the local building department and coordinate any HOA design review before ordering panels. On tight lots near Creve Coeur Park, we stage materials in the driveway and use panel lifts rather than dragging sheets across landscaping. Our crews handle standing seam, stone-coated steel, and retrofit over shingles when the existing layers allow it.

Step 3: We clean the site daily, magnet-sweep for fasteners, and walk the finished roof with you. We leave your property clean and show you the completed work before final payment.

Pricing in Maryland Heights depends on roof size, pitch, access, and whether we are repairing or replacing. Common ballparks: metal roof repair or leak repair from $450, screw replacement and re-fastening from $750, flashing and chimney repair from $600, and metal roof coating from $2.50 per square foot. Full installations start around $8 per square foot for corrugated and ribbed panel, $9 for metal shingle or stone-coated steel, and $10 for standing seam. A typical 1,800 square foot ranch in 63043 often lands in the mid five figures for a full replacement, but we confirm with a free estimate. Call (314) 689-1531 to schedule.

✅ Metal Roofing Alliance Member, licensed and insured for work in Maryland Heights and nearby areas.

My 1970s ranch near Fee Fee Road has two layers of shingles. Can you install metal over them?
Sometimes, but code limits the number of existing layers and the deck condition has to pass inspection. We check the sheathing and flashing first, then tell you whether a retrofit over shingles is allowed or whether a tear-off is the safer path.
A storm just peeled back panels on my roof in Maryland Heights. How fast can you respond?
We prioritize active leaks and wind damage. Call (314) 689-1531 and we will schedule an inspection, tarp if needed, and document the damage for your insurance claim. We never promise coverage, but we do provide the photos and scope your adjuster needs.
What does a standing seam roof cost for a typical Maryland Heights home?
Standing seam starts at $10 per square foot installed. A 2,000 square foot roof with moderate pitch usually falls between $20,000 and $28,000 depending on panel profile, color, and tear-off. We give a firm number after measuring on site.
Do I need a permit for a metal roof replacement in Maryland Heights?
A full replacement or re-roof commonly requires a permit, and thresholds and inspection requirements vary by jurisdiction. We handle the paperwork and confirm current rules with the local building department. You can also check the City of Maryland Heights website for general information before we start.
My HOA requires a specific roof color. Can you help with approval?
Yes. We provide panel samples and manufacturer color chips for your HOA design review, and we schedule installation only after written approval. If your neighbor's property line is close, we keep staging and ladders on your side and confirm setback rules before work begins.
Are you insured for work on my Maryland Heights property?
Yes. We carry general liability and workers' compensation insurance, and we can provide a certificate of insurance before the crew arrives. Our team is fully insured so you are not exposed if someone is injured on the job.
What maintenance does a metal roof need in Maryland Heights before winter?
Check fasteners and seam closures in fall, clear gutters after the pin oaks drop leaves, and inspect flashing around chimneys and skylights. Ice damming shows up at the eaves on steeper homes, so we recommend snow guards and a fall inspection to catch loose screws before freeze-thaw season.

Nearby service areas

📍 St. Louis 63101📍 Clayton 63105📍 Kirkwood 63122📍 Webster Groves 63119
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in St. Louis

All your work handled by qualified professionals in St. Louis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in St. Louis

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

David L.
⭐⭐⭐⭐⭐
DL
David L.
Chesterfield

“Needed a metal building roof put up out on our rural property and these guys handled the whole thing. 40x60 structure, crew of four, done in three days. Straight panels, clean lines, no mess left behind.”

Commercial Metal Roofing
Tom D.
⭐⭐⭐⭐⭐
TD
Tom D.
Ladue

“We had the copper roofing on our brick house redone after years of patina and a couple of problem seams. The crew matched the original detailing beautifully and the new copper looks incredible against the brick. Wasn't cheap, but you get what you pay for with specialty metal.”

Copper & Specialty Metal Roofing
Robert M.
⭐⭐⭐⭐⭐
RM
Robert M.
Creve Coeur

“Our old barn roof was leaking every time it rained and we figured it was a goner. St. Louis Metal Roofing put up new ribbed panels on the whole thing in two days and it's been bone dry since. Even cleaned up all the old screws and scraps without me asking.”

Commercial & Agricultural Metal Roofing
Michelle B.
⭐⭐⭐⭐
MB
Michelle B.
Kirkwood

“Standing seam install on our house, about 2,200 square feet. Crew was professional and the finished roof looks sharp. Only gripe is they showed up a day later than scheduled, but they more than made up for it with the quality of the work.”

Standing Seam Metal Roofing
Jennifer M.
⭐⭐⭐⭐⭐
JM
Jennifer M.
Webster Groves

“Had a gutter pulling away from the roofline on our brick house and water was running down the side. They came out, re-secured everything properly for a metal roof setup, and even checked the flashing while they were up there. Quick, fair price, no upsell nonsense.”

Gutters for Metal Roofs
Karen T.
⭐⭐⭐⭐⭐
KT
Karen T.
Clayton

“We went with a metal roof on our brick home after getting tired of replacing shingles every decade. The install took about four days and the crew was respectful of our landscaping the whole time. Honestly relieved we finally did it.”

Metal Roof Installation
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
University City

“Old slate-style roof was failing and we had them tear it off and replace with a stone-coated steel system that keeps the same look. Flashing and chimney work were handled in the same job. Two months in and it's held up through some serious storms.”

Metal Roof Replacement
Emily C.
⭐⭐⭐⭐
EC
Emily C.
St. Louis

“Our Tudor-style house needed the roof redone and I wanted something that kept the character of the place. They recommended metal shingles and I couldn't be happier, looks close to the original slate from the street but way more durable. Small scheduling hiccup, but the result speaks for itself.”

Metal Shingle Roofing
Free Quote

Get Your Free Quote

Metal Roofing in St. Louis · Response within 24h · No commitment · ☎ (314) 689-1531

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in St. Louis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm