Serving the St. Louis area  ·  (314) 689-1531  ·  Open Mon-Sun 7am-7pm
📞 (314) 689-1531 Free Quote

Metal Roofing in Wentzville, MO (63385) · Local Professionals

St. Louis Metal Roofing · Fast response in Wentzville and the St. Louis area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Wentzville still has a lot of that old farm-town feel, with ranch homes on big lots off Pearce Boulevard and newer subdivisions out toward Wentzville Parkway. But the weather here is anything but gentle, and the metal roofs on barns, shops, and houses around town take a beating from spring hail and straight-line winds.

We're St. Louis Metal Roofing, and we've been working on roofs like yours since 2009. If you're near Wentzville High or out by the Wentzville Flea Market, you've probably seen the kind of wind damage we fix after every big storm.

Metal Roofing in Wentzville (63385)

Wentzville sits on rolling ground with a mix of clay and loam soils, and that matters for drainage. Water pools near foundations after heavy rain, and on sloped lots it runs fast toward the eaves. Older homes around the historic downtown have steep pitches and tight side yards, so we often stage materials in the driveway and use ladder jacks to avoid trampling landscaping. Newer construction on the west side has wider lots but often sits on grade that needs careful flashing at the base of walls and chimneys. Agricultural buildings out on the edges of town have long, low-slope roofs where screw fatigue is common after a few seasons of freeze-thaw. We handle all of it, from corrugated panel on a pole barn to standing seam on a custom home.

Our team has been serving Wentzville and the surrounding St. Louis area since 2009, and we're a Metal Roofing Alliance member. We know the local building stock and the storm patterns that hit this part of St. Charles County.

Our services in Wentzville

How a Job Works in Wentzville

Step 1: You call us at (314) 689-1531 or request a free estimate online. We schedule an on-site assessment, usually within a few days, and walk the roof with you to identify leaks, loose fasteners, or storm damage. We'll also check flashing at chimneys and skylights, and look at the gutters. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the permit through the City of Wentzville and schedule the crew. For homes in tight downtown lots, we plan material delivery for early morning to avoid school traffic near Wentzville Middle School. If your home is in an HOA, we coordinate color and profile approval before ordering panels. Most residential re-roofs take two to four days, depending on weather and roof complexity.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you. We haul away old materials and leave your yard and driveway as clean as we found them. You get a workmanship warranty and care instructions for your new metal roof.

Pricing in Wentzville depends on the size and pitch of your roof, the material you choose, and how accessible the property is. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you're retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits how many layers you can recover. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. Coating and painting can extend the life of an older roof starting at $2.50 per square foot. For a free estimate tailored to your Wentzville home, call (314) 689-1531.

✅ Metal Roofing Alliance Member, licensed and insured for work in Wentzville and nearby areas.

My barn off Highway Z has screw heads backing out after last spring's storms. Can you fix that without replacing the whole roof?
Yes. That's a common issue on agricultural buildings in the Wentzville area. We replace the failed screws with larger, neoprene-washered fasteners and check the panels for elongation around the holes. If the panels are still sound, re-fastening usually solves the problem and buys you years of service. We'll inspect the whole roof and give you an honest assessment.
A storm just peeled back some panels on my roof near Wentzville Parkway. How fast can you get out there?
We prioritize active leaks and storm damage. Call us at (314) 689-1531 and we'll schedule an emergency inspection, often same day or next day depending on call volume. We'll tarp the area if needed to prevent further water damage and then provide a repair estimate. We document everything for your insurance claim if you're filing one.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Wentzville?
For a basic corrugated or ribbed panel roof, you're looking at roughly $5.50 to $8 per square foot installed, so a 1,500 square foot roof might run $8,250 to $12,000 depending on pitch, access, and whether we need to remove existing layers. Standing seam or stone-coated steel will be higher. We give free estimates and itemize the scope so you can see exactly what you're paying for.
Do I need a permit to replace my roof in Wentzville, and how do I find out the rules?
Yes, a roofing permit is generally required for a full replacement or re-roof in Wentzville. The rules and fees are set by the city, and they can vary depending on the scope of work. We recommend checking the City of Wentzville website at https://www.sccmo.org or calling the building department directly to confirm current requirements. We handle the permit application for you as part of the job.
My neighbor's tree limbs hang over my roof. Can I trim them, and will my HOA care about the roof color?
In Missouri, you generally have the right to trim branches that cross your property line, but it's best to talk with your neighbor first to keep things friendly. As for HOA rules, many subdivisions in Wentzville have design guidelines for roof color and material. We can provide color samples and documentation to help you get approval before we order materials.
Are you fully insured for work on my Wentzville property?
Yes, we carry general liability insurance and workers' compensation coverage for every job. We're happy to provide a certificate of insurance before we start. That protects you if anything goes wrong on your property and covers our crew while they're on your roof.
What maintenance does a metal roof need in Wentzville's climate?
Wentzville gets hot, humid summers and freeze-thaw cycles in winter, so we recommend an annual inspection, especially after hail or high winds. Check for loose fasteners, debris in gutters, and any signs of flashing wear. A coating every 10 to 15 years can extend the life of an older panel roof. We offer free inspections to catch small issues before they become leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in St. Louis

All your work handled by qualified professionals in St. Louis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in St. Louis

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in St. Louis · Response within 24h · No commitment · ☎ (314) 689-1531

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in St. Louis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm