Serving the St. Louis area  ·  (314) 689-1531  ·  Open Mon-Sun 7am-7pm
📞 (314) 689-1531 Free Quote

Metal Roofing in Wildwood, MO (63038) · Local Professionals

St. Louis Metal Roofing · Fast response in Wildwood and the St. Louis area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Wildwood, Missouri, is where large wooded lots and long driveways meet some of the newest rooflines in St. Louis County. If you live off Manchester Road near the Wildwood Town Center or back in one of the subdivisions off Highway 100, your home likely dates from the 1990s or later, with steep gables and wide expanses of shingle that take a beating from spring hail.

Homeowners in 63038 call St. Louis Metal Roofing because we understand this specific mix: newer builds choosing Class 4 metal for hail protection, and storm-driven wind that lifts weak roof edges. We have been working in the St. Louis area since 2009, and we know the difference between a Wildwood roof that needs a repair and one that is ready for replacement.

Metal Roofing in Wildwood (63038)

Wildwood is not a flat grid of city lots. Many properties sit on sloping, tree-covered acreage where drainage, grade, and access all shape the job. Roofs here face severe thunderstorms that roll in from the west, and the wind that comes with them tends to grab at the edges, lifting panels and pulling fasteners loose. Hail is the other big issue: newer subdivisions often choose Class 4 metal specifically because it handles impact better than standard shingles. We also see ice damming at the eaves on homes set higher up the bluffs, where freeze-thaw cycles push water back under the roof edge. Our crews are fully insured with general liability and workers' compensation, and we are a Metal Roofing Alliance Member.

Since 2009, we have served Wildwood and the surrounding St. Louis area with installation, repair, and replacement. Whether you have a standing seam roof on a custom home or a corrugated panel roof on a detached garage or outbuilding, we bring the same approach: assess the actual condition, explain the options, and do the work correctly.

Our services in Wildwood

How a Job Works in Wildwood

Step 1: You call (314) 689-1531 or request a free estimate. We schedule an on-site assessment, walk the roof, check the flashing, fasteners, and seams, and talk through what we find. You get a clear written scope before any work begins.

Step 2: We handle the work itself. On Wildwood properties, that often means planning around long driveways, steep grade, and mature trees that limit where we can stage materials. If your neighborhood has an HOA, we can coordinate on panel profile and color before ordering. For a full replacement or re-roof, roofing permits are commonly required, and thresholds and fees vary by jurisdiction, so we confirm the requirements with the local building department before scheduling. You can also check the City of Wildwood website for general information, though it is always best to confirm the current rules directly with the building department.

Step 3: We clean up and walk the property with you. That means magnet sweeps for nails, hauling away old material, and a final inspection of the finished roof and gutters. We leave your property clean and show you exactly what was done.

Pricing in Wildwood depends on the size and pitch of your roof, the material you choose, access around the house, and the condition of the existing roof deck. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, and a full metal roof replacement starts at $9 per square foot. A retrofit over existing shingles starts at $7 per square foot, though code limits how many existing layers can stay. Repairs and leak repairs start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, and skylight repair starts at $600. Storm and wind damage inspections are free. For a realistic number on your home, call (314) 689-1531 and we will schedule a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Wildwood and nearby areas.

My home off Manchester Road near Wildwood Town Center has a steep roof and tall trees. Does that affect a metal roof installation?
Yes, it does. Steep pitches require more safety setup and slower work, and mature trees mean we have to plan where to stage panels and how to protect landscaping. We also check for shade-related moss and debris buildup that can hide deck issues. During the estimate we walk the property and account for access, so the quote reflects the real job.
A storm just peeled back panels on my roof in Wildwood. How fast can you respond?
Call (314) 689-1531 and we will schedule a free storm and wind damage inspection as quickly as possible. We document the damage, make temporary repairs if needed to stop water intrusion, and give you a written scope for the permanent fix. We also provide insurance claim documentation, though coverage decisions are always up to your insurer.
What does a typical metal roof repair cost in Wildwood?
Most repairs start at $450 for leak repair, and screw replacement or re-fastening starts at $750. The final price depends on the size of the repair, roof pitch, how accessible the area is, and whether flashing or decking needs work. We give you a firm number after the free inspection, not a range that changes later.
Do I need a permit for a metal roof replacement in Wildwood?
Roofing permits are commonly required for a full replacement or re-roof, and the thresholds, fees, and inspection requirements vary by jurisdiction. We confirm the current requirements with the local building department before scheduling your job. You can also review general information on Wildwood's official city site, but always verify the rules directly with the building department.
My HOA has design rules, and my neighbor's tree limbs hang over the property line. How do you handle that?
For HOA rules, we help you confirm approved panel profiles and colors before we order materials, and we can provide product information for your architectural review. For overhanging limbs, we work around them where possible and note any branches that need trimming before installation. We do not cut a neighbor's tree without your direction, but we will flag it during the estimate so there are no surprises.
Are you fully insured for work at my Wildwood home?
Yes. We carry general liability insurance and workers' compensation coverage. We are happy to provide proof of insurance before work begins, and our crews are covered on your property.
What maintenance does a metal roof need in Wildwood's climate?
In Wildwood, the main things to watch are fasteners, sealant at flashing and penetrations, and debris buildup in valleys and behind chimneys. After severe storms or a hail event, a quick inspection can catch lifted panels or loose screws before they become leaks. We recommend a check in spring after storm season and again in late fall before winter ice. A free estimate inspection is a good starting point.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in St. Louis

All your work handled by qualified professionals in St. Louis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in St. Louis

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in St. Louis · Response within 24h · No commitment · ☎ (314) 689-1531

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in St. Louis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm