Serving the St. Louis area  ·  (314) 689-1531  ·  Open Mon-Sun 7am-7pm
📞 (314) 689-1531 Free Quote

Metal Roofing in O'Fallon, MO (63366) · Local Professionals

St. Louis Metal Roofing · Fast response in O'Fallon and the St. Louis area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

O'Fallon still has plenty of farm country in it, and that means barns and older metal roofs that have seen decades of Missouri weather. From the older stretches near Main Street to the newer subdivisions off Highway K and Mexico Road, the mix of housing stock here keeps our crews busy year round.

Homeowners in O'Fallon (63366) call St. Louis Metal Roofing because we understand what wind and hail do to a roof out here. The 2011 Good Friday tornado and the May 2025 tornado through north city are reminders that this area takes direct hits. We have been serving O'Fallon and the surrounding St. Louis area since 2009, and we are a Metal Roofing Alliance member.

Metal Roofing in O'Fallon (63366)

O'Fallon sits where St. Charles County farmland meets fast-growing subdivisions, so the work here ranges from re-fastening corrugated panels on a pole barn off Highway DD to installing standing seam on a two-story home near Fort Zumwalt Park. The ground can be flat and open on the farm parcels, which exposes roofs to straight-line wind, and tighter in the older neighborhoods closer to Main Street, where access for trucks and material drops takes some planning. Drainage matters too: clay-heavy soil in parts of town means gutters and downspouts have to move water away from the foundation, especially on the grade around the older homes near Civic Park. We handle corrugated and ribbed panel roofing and screw replacement on ag buildings, plus standing seam, metal shingle, and stone-coated steel on homes. Our crews are fully insured with general liability and workers' compensation.

Our experience serving O'Fallon and the St. Louis area, since 2009.

Our services in O'Fallon

How a Job Works in O'Fallon

Step 1: you call (314) 689-1531 and we set up a free on-site assessment. We look at the roof, the fasteners, the flashing, and the attic side if we can get to it, then give you a written estimate with the scope spelled out.

Step 2: we schedule the work and pull the permit through the City of O'Fallon before we start. On tighter lots near Main Street or in the older neighborhoods, we plan material staging ahead of time so we are not blocking driveways. If your home is in an HOA or a historic review area, we help you get the panel profile and color approved before anything is ordered.

Step 3: we clean up daily and do a final walkthrough with you. Magnets run over the lawn, gutters checked, and we do not leave until you have seen the finished work and know what to expect going forward.

Pricing in O'Fallon depends on the size of the roof, the pitch, access, and the condition of what is underneath. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a metal roof over shingles (retrofit) at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, metal shingle and stone-coated steel at $9, and copper or specialty metal at $20. Repairs start at $450, screw replacement and re-fastening at $750, flashing, chimney, and skylight repair at $600, and coating or painting at $2.50 per square foot. Storm and wind damage inspections are free. Call (314) 689-1531 for a free estimate on your specific roof.

✅ Metal Roofing Alliance Member, licensed and insured for work in O'Fallon and nearby areas.

My barn off Highway DD has corrugated panels pulling loose at the screws. Can you fix that without replacing the whole roof?
Yes. Loose fasteners and enlarged screw holes are common on older ag panels, and we handle screw replacement and re-fastening starting at $750. We replace the screws with proper gasketed fasteners, seal the holes that have wallowed out, and check the panels for fatigue around the fastening lines. If a few panels are too far gone, we can replace just those sections.
A storm just took panels off my roof near Fort Zumwalt Park. How fast can you get out?
Call (314) 689-1531 and we will schedule a free storm and wind damage inspection as quickly as we can, usually within a day or two depending on how many calls are coming in after a storm. We document the damage for your insurance claim, tarp or secure what is open, and give you a written repair estimate. We never promise coverage, that is between you and your insurer, but we make sure the documentation is thorough.
What does a typical metal roof replacement cost for a ranch home in the 63366 area?
For a standard ranch in O'Fallon, most replacements land somewhere between the $9 per square foot replacement rate and the $10 standing seam rate, depending on roof size, pitch, and whether we are tearing off or going over existing shingles. A 1,500 square foot roof is a different number than a 3,000 square foot roof. Call (314) 689-1531 and we will give you a real number after we see it.
Do I need a permit for a metal roof in O'Fallon, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof in O'Fallon, and the rules vary by jurisdiction. We pull the permit and coordinate the inspection as part of the job. You can check the City of O'Fallon website for the current requirements, and we will confirm the specifics with the building department before we start.
My neighbor says my new metal roof panels overhang the property line. What do I do?
Property line issues come up, especially on tighter lots. We set the roof according to the approved plans and keep overhangs within the footprint of the structure, but if there is a dispute, a survey is the right answer. If your neighborhood has an HOA, we also help you submit the panel profile and color for approval before the order goes in, which heads off most conflicts.
Are you insured for work on my O'Fallon property?
Yes. We are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before we start, and we encourage you to ask for it. That coverage protects you if anything goes wrong on the job.
What maintenance does a metal roof need in O'Fallon's climate?
The big ones here are fastener checks after wind events and keeping ice from damming at the eaves in winter. We recommend an inspection after any significant hail or wind storm, and we check screws, seals, and flashing. Snow guards and ice protection start at $1,200 and are worth considering on steeper roofs. Coating or painting at $2.50 per square foot can extend the life of an older panel roof.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in St. Louis

All your work handled by qualified professionals in St. Louis

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in St. Louis

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in St. Louis · Response within 24h · No commitment · ☎ (314) 689-1531

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in St. Louis ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm